Procedure For Tilting Down; Cruising In Other Conditions; Cruising In Salt Water; Cruising In Turbid Water - Yamaha 250B Manual Del Propietário

PROCEDURE FOR TILTING DOWN

Power trim and tilt
1) Push the power trim and tilt switch
"UP" until the engine is supported by
the tilt rod.
2) Release the tilt-support lever.
3) Push the power trim and tilt switch
"DN" (Down) to lower the engine to
the desired position.
411021
EMH60010
OTHER CONDITIONS

CRUISING IN SALT WATER

After operating in salt water, wash out the
cooling-water passages with fresh water
to prevent them from becoming clogged-
up with salt deposits.
NOTE
Refer to cooling system flushing instruc-
tions in TRANSPORTING AND STORING
OUTBOARD MOTOR.

CRUISING IN TURBID WATER

It is strongly recommended that the
optional chromium-plated water-pump kit
be installed if the outboard is to be used
in turbid (muddy) water conditions.
3-21
CRUISING IN
GB