KNOVA KN SCM-05P Manual Del Usuario página 9

FITTING THE BANDSAW TO THE STAND
• The guide bar 6 can now be adjusted.
• Tighten the guide bar locking screws
to fix the guide bar in place.
ADJUSTING THE AUXILIARY HANDLE
• To adjust the auxiliary handle 11
loosen the locking nut A using the
No. 6 allen key 25 .
• Move the auxiliary handle to the
desired position.
• Fix the auxiliary handle in place by
tightening the locking nut using the
No. 6 allen key.
SECURING THE WORKPIECE
• Open the vise fixing knob 19 .
• Place the workpiece in the stand vise
18 and push the vise tight against
the workpiece.
• Tighten the vise fixing knob to secure
the workpiece in place.