EGO PTX5100 Manual Del Usuario página 15

CONNECTING THE HEDGE TRIMMER ATTACHMENT TO THE
TELESCOPIC POWER POLE
This hedge trimmer attachment is designed for use with EGO telescopic power pole
PPX1000//PPX1000-FC.
The hedge trimmer attachment connects to the telescopic power pole by means of a
coupler device.
1. Switch off the tool and remove the battery pack.
2. Loosen the locking knob
3. Align the arrow on the hedge trimmer shaft with the insert indication on the
coupler and push the hedge trimmer attachment into the coupler until you hear a
clear "click" sound. The hedge trimmer shaft should be positioned all the way to
the LINE on the shaft that indicates that the hedge trimmer attachment is properly
mounted into place (Fig. 4).
4. Pull the shaft of the hedge trimmer attachment to verify that it is securely locked
into the coupler. If not, push the attachment shaft into the coupler until it snaps
into place.
5. Tighten the locking knob securely.
WARNING:
fully tightened before operating the tool. Check it periodically for tightness during use.
4
To avoid serious personal injury, be certain that the locking knob is
HEDGE TRIMMER ATTACHMENT — PTX5100/PTX5100-FC
Shaft-Release Button
Locking knob
Insert Indication for
Attachment Shaft
Arrow on the
Attachment Shaft
Line
15