Scenes; Ventilator Speed - hager tebis TX460 Manual De Empleo

XP1_TX460_6T7269a.qxd

8.7 Scenes

This menu allows you to define or modify the temperature
set-point value associated with the installation scenes.
• Follow the same steps to modify one or several other scenes.
• Press button C to return to the Settings screen.

8.8 Ventilator speed

This menu is displayed only when the Environment Control and
Regulation controls an installation set-up for ventil convectors
(or user settings of Configuration mode).
20/10/05 13:44
• Select the scene number to be set
using button
• Press button
• Select one of the set-point values
available (Comfort, Eco, Reduced,
Frost-free or Temperature) using
.
and
If temperature is selected, it is nec-
essary to set next the temperature value
desired using button
• Press button
Scenes screen.
• Select the ventilator speed desired
using button
• Press button
return to the screen Settings.
93
Page 93
.
and
to confirm.
.
and
to return to the
.
and
to confirm and
Settings mode