Care And Maintenance - Kobalt KLMS 1024B-03 Manual Del Usuario

CARE AND MAINTENANCE

WARNING
• All maintenance should only be carried out by a qualified service technician.
• Before cleaning or performing any maintenance, remove the battery pack. For safe and
proper operation, always keep the tool and its ventilation slots clean.
• When servicing, use only identical replacement parts. Use of any other parts may create a
hazard or cause product damage.
• Always wear safety goggles or safety glasses with side shields during power tool operation
or when blowing dust. If the operation is dusty, also wear a dust mask.
• Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils,
etc., come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic,
which may result in serious personal injury.
13. Cleaning
WARNING
• Always remove the battery pack when servicing or transporting the mower.
• When cleaning the mower, DO NOT immerse in water or other liquids.
The underside of mower deck should be cleaned after each use, as grass clippings, leaves,
dirt and other debris will accumulate. This accumulation is undesirable, as it will promote rust
and corrosion.
Remove any build-up of grass and leaves on or around the drive shaft and motor fan (do not
use water). Wipe the mower clean with a damp cloth.
14. Lubrication
Lubricate with light oil as directed below at least once each season.
• Periodically lubricate the spring and pivot pin in the quick-adjust handle, the torsion spring,
and pivot of the rear-discharge door with light oil to prevent rust.
• Place the mower into the locked storage position, place the folded mower upright on the
ground.
• Lubricate the deck-height adjustment joint.
• Lubricate the bearings on the drive shaft near the rear wheels and the bearings in the front
wheels.
18