Checking Bolts And Nuts; Motor Exterior - Yamaha 25B Manual Del Propietário

EMU01280
Disconnecting the Battery
Disconnect the BLACK lead from the NEGA-
TIVE (-) terminal first. Then disconnect the
RED lead from the POSITIVE (+) terminal.
EMU00408

CHECKING BOLTS AND NUTS

1) Check that bolts securing the cylinder
head and engine and the nut securing
the flywheel are tightened with their
specified tightening torque.
2) Check the tightening torque of other
bolts and nuts.
EMU00409

MOTOR EXTERIOR

EMU00410
Cleaning the Outboard Motor
After use, wash the exterior of the outboard
with fresh water.
Flush the cooling system with fresh water.
NOTE:
Refer to Flushing Cooling System instruc-
000679
tions in "TRANSPORTING AND STORING
OUTBOARD MOTOR".
4-27
GB