Maintenance
To clean your monitor, please refer to the instructions below.:
NOTE: To prevent electrical shock, do not open the LCD monitor casing. Leave repair of the monitor to qualified
personnel, please see the tech support information in the warranty.
1. Unplug the power
Unplug the LCD monitor from the AC socket before cleaning the monitor.
2. Check the cover
Check to see if the LCD Monitor and accessories are damaged, broken, or strained. If so, please consult the warranty card
for Tech Support information.
3. Clean
Never spray or pour any liquid directly onto the screen or case. Avoid allowing any water or liquid from entering the LCD
monitor or accessories.
4. Cleaner
Use water or non-ammonia/non-alcohol based glass cleaner. Do not use harsh or abrasive cleaners such as ketene
(such as acetone), ethanol, toluene, acetic acid, methane, chloride, or other detergents to clean the monitor, these
chemicals can damage the LCD monitor.
5. Screen
To clean your LCD monitor screen or case, use water or a mild cleaner, as listed above. Moisten a soft, clean cloth or if
possible, use a special screen cleaner sheet or a solution suitable for static electricity application. Using any cleaner other
than water or a mild cleaner may damage your monitor and will not be covered under the warranty.
6. Storage of Unit
If the LCD monitor is not in use for a long time, please unplug it and store it in its original box in order to avoid any damage.
7. Disclaimer
Any damage resulting from use of any cleaner that is not mentioned above is not covered under the terms of the warranty
on this product.
Cleaning Your Monitor
1. Gently wipe the screen with a clean soft lens brush or a soft clean lint-free cloth. This removes dust and other particles that
can scratch the screen.
2. Do not apply pressure to the screen surface when wiping it clean.
3. Do not pour or spray any liquid directly onto the screen or case of the LCD monitor. Chemical cleaners may damage
the screen or the LCD monitor
15