Remote Control - METRICA 60719 Manual Del Usuario

NOTES:
– 5 hours are required to fully recharge the standard re-
chargeable batteries supplied with the instrument
– Power required for the charger:
- Frequency: 50 – 60 Hz
- Voltage: 85 - 265 V
– When the instrument is stored (or unused for a long time)
take out the batteries from the instrument whether dry or
rechargeable batteries
– New or long-time unused rechargeable batteries needs to
be recharged and discharged 3 times to achieve the best
performance.

5. REMOTE CONTROL

The remote control adopts the infrared technique.
The remote control panel includes 6 buttons.
After turning on the instrument point the remote control at the
point (D) of the unit to activate the remote control function within
about 20 m.
Pressing any key the indicator on the device blinks to show the
operating signal has been sent out.
1
4
Functions fulfilled by the remote control are as follows:
1. Rotating: press the button (1) repeatedly to set the desired
speed of rotation
2. Slope adjustment.
The plan generated by the rotating laser can be tilted along
the directions X and Y, indicated by arrows on the top of the
instrument.
To perform this operation: Once switched on the instrument,
and while the laser ray is rotating:
To prepare the inclination in X-direction
- Press button (2) of the remote control,
- the green led on the left of (D) lights up
- to move the laser plan up and down press the buttons "+"
(4) o "-" (5)
2
3
6
5
11