- press again button (2) to come back to self levelling function
To prepare the inclination in Y-direction
- Press button (2) of the remote control,
- the green led on the right of (D) lights up
- to move the laser plan up and down press the buttons "+"
(4) o "-" (5)
- press again button (2) to come back to self levelling fun-
ction.
The laser scan mode can be changed
– To switch from rotating beam to laser point press button (1)
on the remote control or (C) button on the instrument
– To stop the laser point press button (1) on the remote control
– Press button (4) discontinuously to make the point rotating
step by step
– Keep pressed button (4) to make the point rotating in a conti-
nuous manner
– To return to rotating beam mode press button (1) on the remo-
te control or (C) button on the instrument until you reach the
desired mode.
– To adjust the laser point rotational speed press button (1) on
the remote control repeatedly
12
6. RECEVER
Receiver visible on both sides and acoustic
Press
to switch it on/off
Press button
to activate/disactivate the sound
Press button
to increase or decrease the reading capability
of the receiver