Auto Power-Off Function - LEXIBOOK C1320PTVD Manual Del Usuario

OPERATING WITH REMOTE CONTROL
TO SELECT TV STATION USING THE PROGRAM NUMBERS:
• Program Number Up and Down
Press the " + " or "
• 0 - 9 Digital Button
To select TV stations using program numbers 0 - 9, selecting program number will be
shown in the right corner of the top of screen in green colour.
For example:
Press "9" digit button to select program "9".
• Two Digital Program Number
To select TV station using program numbers "10" - "99".
For example: selecting program "12"
* Press the button "-/-- " ,on screen will show "--".
*Then press the number "1" button, on screen will show "1-"
* Then press the number "2" button, channel "12" will show.
• Three Digital Program Number
To select TV station using program numbers "100"- "249".
For example: selecting program "123"
* Press the button "-/-- " twice,on screen will show "---".
* Then press the number "1" button, on screen will show "1--"
* Then press the number "2" button, channel "12-" will show.
* Then press the number "3" button, channel "123" will show.
POWER Button
l Press the " " button to switch the picture and sound ON/OFF the picture and sound.
MUTE Button
Press the Mute button to switch OFF the sound,press once again to switch ON the sound.
l
INPUT Button
• Press the INPUT Button to select AV mode,Press again back to TV mode.
TV
TV/DVD Button
Press the TV/DVD mode button to select DVD mode. Press again to go back to TV mode.
l
(There will be a few seconds delay before entering the DVD mode).

AUTO POWER-OFF FUNCTION

• When the TV is in TV or AV(video) mode and it' s without a signal for about 8 minutes, it will
automatically power off(standby mode) to save the energy.
-" button to select a higher or lower program number. .
AV1 AV2
13