PICTURE CD OPERATION
PLAYBACK OF A PICTURE CD
1.
Press "TV/AV/DVD" button on the unit or press the TV/DVD direct key on the remote handset
to turn DVD.
2.
Press the Open/Close button to open the disc tray. Insert a picture CD with the label side facing
up on the disc tray.
3. Press the OPEN/CLOSE button to close the disc tray. After loading, the FOLDER/PICTURE menu
will appear on the TV screen. Press the Navigation ( , ) buttons to select the desired folder/
track.
4.
Press the PLAY/ENTER button to confirm. Press the Navigation ( , ) buttons to select the
desired picture; the image preview of the picture will appear in the image preview area. Press
the PLAY/ENTER button to play the picture. You can also use the number button to enter a 3-
digit number to select the desired picture, playback will start automatically. Press the
STOP (
) button on main unit or press PAUSE/STOP (
stop playback.
5.
To select other folders, press Navigation ( , ) button to select "- -" followed by press the
PLAY/ENTER button to go back to select the folders and use the Navigation ( , ) button to
select the desired folder again.
Caring for Discs
•
Treat the disc carefully. Handle the disc only by
its edges. Never allow your fingers to come in
contact with the shiny, unprinted side of the disc.
•
Do not attach adhesive tape, stickers, etc. to the
disc label.
•
Clean the disc periodically with a soft, lint-free,
dry cloth. Never use detergents or abrasive
cleaners to clean the disc. If necessary, use a
CD cleaning kit.
•
If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).
•
When cleaning the disc, wipe in straight lines from the center of the disc to the outer edge of
the disc. Never wipe in circular motions.
•
Discs should be stored in their cases after each use to avoid damage.
•
Do not expose discs to direct sunlight, high humidity, high temperatures or dust, etc.
Prolonged exposure or extreme temperatures can warp the disc.
•
Do not stick or write anything on either side of the disc. Sharp writing instruments, or the
ink, may damage the surface.
22
) button on remote control twice to
/