Black+Decker BXFPA1200E Manual Del Usuario página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
ENGLISH
(Original instructions)
Use:
♦ Extend the cable completely before plugging it in.
♦ Place the jar into the motor body and block it by turning
clockwhise. (Fig. 1).
♦ Choose the desired accessory and place it according to
the instructions.
♦ Place the lid and block it by turning clockwise. (Fig. 1).
♦ Connect the appliance to the mains.
♦ Add ingredients in the opening and use the pusher to
process the food.
♦ The pusher can be used as a measuring cup.
♦ Turn the appliance on, by using one of the speed
selector.
♦ IMPORTANT: while the appliance is operating, never
place fingers into the jar. Always use the pusher for
adding ingredients.
♦ Note: the appliance cannot be switched on until the
bowl and the lid has been attached and screwed on
tight.
blade (F):
♦ This accessory is used for chopping, crushing,
mashing.
♦ Insert the accessory into the holder (C) until hear the
click. Make sure it is correctly fitted.
♦ Place the accessory holder on the central axis (B1) of
the jar.
Beating disc (g):
♦ This accessory is used to prepare cream, egg whites
and mayonnaise.
♦ Insert the accessory into the holder (C) until hear the
click. Make sure it is correctly fitted.
♦ Place the accessory holder on the central axis (B1) of
the jar.
Kneading Hook (H):
♦ This accessory is used to knead heavy dough and mix
ingredients that should not be chopped.
♦ Insert the accessory into the holder (C) until hear the
click. Make sure it is correctly fitted.
♦ Place the accessory holder on the central axis (B1) of
the jar.
Grating/Slicing Discs (I, J, K):
♦ These accessories are used to cut or grate fruit, vegeta-
bles, cheese, etc. There are different sizes of zest and
cutting, besides being reversible.
6
♦ Insert the accessory into the holder (C). Make sure it is
correctly fitted.
♦ Place the accessory holder on the central axis (B1) of
the jar.
Juicer (M):
♦ This accessory is used to squeeze citrus fruits. There
are two different sizes: the large one for oranges and the
small one for limes or lemons.
♦ Select the cone accorfing to the food to be squeezed,
placing it in the center of the filter.
♦ Insert the filter of the juicer into the accessory holder (C).
Make sure it is correctly fitted.
♦ Place the accessory holder on the central axis (B1) of
the jar and turn it clockwise until hear the click.
Once you have finished using the appli-
ance:
♦ Stop the appliance, selecting position 0 on the selector
control.
♦ Unplug the appliance from the mains.
♦ Open the lid by turning in the opposite direction.
♦ Lift the accessory and the support.
♦ Remove the accessory form the holder. In the case of
the blade and kneading hook, press the two tabs until
the accessory is released.
♦ Unlock the jar by turning in the opposite direction.
♦ Clean the appliance.
CLEANING
♦ Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
♦ Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
♦ Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
♦ Never submerge the appliance in water or any other
liquid or place it under running water.
♦ It is advisable to clean the appliance regularly and
remove any food remains.
♦ If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance's useful life and could become unsafe
to use.

Publicidad

Tabla de contenido
loading

Tabla de contenido