Workplace Safety; Electrical Safety; Personal Safety - NUTOOL MP900N Manual Del Usuario

GENERAL SAFETY REGULATIONS
FOR ELECTRIC TOOLS
CAUTION
Read all safety regulations and instructions.
Any failures made in following the safety regulations and
instructions may result in an electric shock, fire and/or
serious injury.
Keep all safety regulations and instructions in a safe
place for future use.
The term "electric tool" used in the safety regulations refers
to electric tools operated from the mains power supply
(with a power cable) and to battery operated electric tools
(without a power cable).

1 WORKPLACE SAFETY

• Keep your work area clean and well illuminated.
Untidy or unlit work areas can result in accidents.
• Do not use this tool in a potentially explosive environment
containing combustible liquids, gases or dust.
Electric tools generate sparks, which can in turn ignite
dust or vapors.
• Keep children and other persons away from the electric
tool while it is being used.
Allowing yourself to get distracted can cause you to lose
control of the tool.

2 ELECTRICAL SAFETY

• The tool's connector plug must be able to fit into the
socket outlet. Do not modify the plug in any way!
Do not use adapter plugs in conjunction with
electrically grounded tools.
Unmodified plugs and matching socket outlets reduce the
risk of an electric shock.
• Avoid touching grounded surfaces, such as those of
pipes/tubes, heaters, cookers and refrigerators.
There is an increased risk of getting an electric shock if
you are electrically grounded.
• Keep the tool away from rain and moisture/wet conditions.
Penetration of water into an electric tool increases the risk
of an electric shock.
• Do not use the cable to carry the tool, hang it up or
pull the plug out of the socket. Keep the cable away
from sources of heat, oil, sharp edges and moving
tool parts.
Damaged or tangled cable increases the risk of an electric
shock.
• If you intend to use an electric tool outdoors, ensure
that you only use extension cable that is approved for
outdoor applications.
Using extension cable that is approved for outdoor
applications reduces the risk of an electric shock.
• If operation of the electric tool in a damp environment
can not be avoided, use a earthleakage circuit-breaker.
The earth-leakage circuit-breaker reduces the risk of an
electric shock.

3 PERSONAL SAFETY

• Be alert, work conscientiously and exercise appropriate
caution when using the electric tool. Do not use the
tool if you are tired or are under the influence of
drugs/medication or alcohol.
One moment of carelessness or lack of attention when
using the electric tool can cause serious bodily injury!
• Always wear personal protective equipment (PPE),
including safety goggles.
Wearing p ersonal p rotective e quipment s uch a s a d ust m ask,
non-slip footwear, protective headgear and ear muffs
(depending upon the type of electric tool and the particular
application) reduces the risk of sustaining injury.
• Make sure that the tool cannot start up accidentally.
Ensure that the electric tool is switched off before you
connect the tool to the power supply and/or insert the
battery, or pick up or carry the tool.
Physically touching the switch with your finger when
carrying the tool or connecting the tool to the power supply
switched on can lead to accidents.
• Remove adjusting tools/wrench(es) prior to switching
on the power tool.
A tool or wrench that is positioned inside a rotating power
tool part can cause injury.
• Avoid abnormal working postures. Make sure you stand
squarely and keep your balance at all times.
This way, you will be able to have better control over the
tool in unexpected situations.
• Wear suitable clothes. Never wear loose fitting clothes
or jewelry. Keep hair, clothes and gloves away from
moving parts.
Loose clothing, dangling jewelry and long hair can be
caught by moving parts.
• If dust extraction and dust collection devices can be
mounted, ensure that these are connected and are
properly used.
The use of a dust extraction system can reduce the danger
posed by dust.
4 USING THE TREATMENT OF ELECTRIC
TOOLS
• Do not overload your tool. Only use suitable electric
tools to perform your work.
Using the right electric tool allows you to work better and
safer within the tool's quoted capacity range.
• Do not use an electric tool whose switch is defective.
An electric tool that no longer can be switched on or off is
dangerous and must be repaired.
• Pull the plug out of the socket and/or remove the
battery before making any adjustments to the tool,
changing accessories or put the tool down.
This precaution eliminates the possibility of inadvertently
starting the tool.
• When not in use, store electric tools out of the reach
of children. Do not allow those persons to use this
tool who are unfamiliar with it or who have not read
these instructions.
Electric tools are dangerous when they are used by
inexperienced persons.
13
GB