Publicidad
STEP 7
1. Place the small end cap (G) onto the 3/4 in. tube (A).
2. Insert the transition ring (L) into the straight tube (B).
3. Slide the 3/4 in. tube (A) through the transition ring (L) and into the straight tube (B), as shown.
4. Place the tape strips (M) around the seams of the tubes.
NOTE: After inserting the 3/4 in. tube (A) into the straight tube (B) ensure that the transition ring (L)
fits snuggly over the straight tube (B).
Pg 9 of 20
G
A
B
A
L
B
1-800-892-3986
IS02176-I
Publicidad
