Handle Assembly; Suction Head Assembly - avenli 290717 Manual De Instrucciones

How to use ?
1. How to connect with charger ?
(1)Before connection to the cleaner, firstly
connecting the charger with socket to check the
charger quality, when the light is green, the
charger is ok; Then, connecting to the cleaner, if
the light is red, it means the cleaner is charging.
(2)Around 3 hours later, the light turns to green,
it means the machine is full of power now.
2. How to assemble the cleaner ?
2.1 Component installation
Please assemble the machine by arrows, especially the signs ON/OFF , OPEN / CLOSE at the body.

2.2 Handle assembly

The cleaner can either connect with portable
handle A, or standard telescopic poles B ( B is
not with shipment, needs to extra purchase )

2.3 Suction head assembly

Please take the correct way to assemble the vacuum head
and front filter, please be sure the front filter way is right,
otherwise, the cleaner can not work efficiently.(See,Fig"A"
and "B")
2.4 F assembly
ilter bag
2.4.1 How to choose the correct filter bag?
(1) Large mesh filter bag
It is used for dirty pools, or plenty of rubbish into the pools, such as beginning of season, after big
shower or rainning.
(2) Fine material filter bag ( It is optional, needs to extra purchase)
It is used for small debris, such as dusts, muds.
3
A
A
B
B