Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FRAME MARKING
LD EN175 F
Number of the standard which the product fulfills
Identification of the manufacturer
PROTECTION LENS MARKING
LD EN166 1
Number of the standard which the product fulfills
Identification of the manufacturer
FILTER GLASS MARKING
The scale number must be adapted to the relevant welding process. To know their characteristics of
protection, consult the marking and the notice of use the filters.
11
JY 1
CE
Number of optical class
Identification of the manufacturer
Shade number
REPLACEMENT SPARE PARTS
Use only original replacement parts. To replace the glass, you must check the marking compatibility.
The helmet must be used with a filter for the welding.
DURATION OF USE
Check frequently the article to spot any damage. When the frame is become hard and brittle, replace
it. The shelf life of the welding helmet, if stored and used correctly, is over 3 years. We would
recommend changing them every 2-3 years.
WARNING
•
This product is for face protection against moderate impact hazards but NOT unbreakable.
Do not modify or alter the face protector.
•
Pitted or scratched lens reduce vision and seriously reduce protection and should be immediately
•
replaced.
•
Lens in reinforced mineral glass need one fitted extra-glass.
Always check with supervisory personnel to ensure you are being given the proper protection
•
relative to working conditions, consult relative European standards.
•
The material which may come into contact with the wearer's skin could cause allergic reactions to
susceptible individuals.
•
If the symbols S, F, B and A are not common to both ocular and the frame then it is the lower
level which shall be assigned to the complete
TRANSPORT
For avoiding dust and wet, put welding helmet in a clear poly bag and then in a box/carton.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
S W CE
CE Certification
Symbol of protection against water immersion
Symbol of protection against increased robustness (5.1m/
Symbol of protection against high speed particles low energy (45m/s)
F
S
CE
CE Certification
Symbol of protection against increased robustness (5.1 m/s)
Symbol of protection against high speed particles low energy (45 m/s)
Number of optical class
CE Certification
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
eye-protector.
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
)
s
Publicidad
Tabla de contenido
