Iso-Tech ILCM 06 Manual De Instrucciones página 4

SeCtIOn 1 - Safety InfORMatIOn
Safety Information
Read and understand this instruction manual
completely before using this instrument. Failure to
observe the warnings and cautions in this instruction
manual may result in injury, death or damage to the
instrument and other equipment or property.
If this instrument is used in a manner not specified
in these instructions, the protection provided by the
instrument may be impaired.
Warning
Identifies hazardous conditions and actions that could
cause BODILY HARM or DEATH.
Caution
Identifies conditions and actions that could DAMAGE
the instrument or equipment under test.
WaRnIng
• Examine the instrument before use.
Do not use the instrument if it is wet or damaged
• Use the instrument only as specified in these
instructions or the protection offered by the
instrument may be impaired
• Do not measure more than the rated current, as
marked on instrument
• Use caution with voltages above 30 Vac rms,
42 Vac peak, or 60 Vdc. These voltages pose a
shock hazard
• To avoid false readings that can lead to electric
shock and injury, replace battery as soon as low
battery indicator
• Do not use the instrument in hazardous areas or
around explosive gases or vapours
• Wear suitable personal protective equipment when
working around or near hazardous live conductors
which could be accessible
• Use extreme caution when working around bare
conductors or bus bars. Contact with the conductor
could result in electric shock.
appears
+
ILCM 06 English
3