Linksys R75 Guia Del Usuario página 17

Your Internet cable is not plugged in
If you get a "Your Internet cable is not plugged in" message when trying to set up your router, follow
these troubleshooting steps.
• Make sure that an ethernet cable (like the one supplied with your router) is securely connected
to the yellow Internet port on the back of the router and to the appropriate port on your modem.
This port on the modem is usually labeled Ethernet, but may be named Internet or WAN.
• Make sure that your modem is connected to power and is turned on. Make sure the power
switch is set to the ON or l (as opposed to O) position.
If your internet service is cable, verify that the cable modem's CABLE port is connected to the
•
coaxial cable provided by your ISP.
• If your internet service is DSL, make sure that the DSL phone line is connected to the modem's
DSL port.
message
17