Getting Started; Opening The Clearview Go - Optelec ClearView GO Manual Del Usuario

Optelec ClearView GO

2. Getting started

2.1. Opening the ClearView GO

1. Place the folded ClearView GO on a stable surface such as a table.
2. Press on the base plate with one hand, while the other hand lifts the top of the
body frame.
3. Lift the arm until it locks in place.
4. Put both hands on the left and right sides of the LCD monitor.
5. Pull the LCD monitor towards you.
6. Push the LCD monitor up using both hands and adjust it to a suitable position.
English 13