Conceptronic Grab'n'GO CHD2UL Guía De Iniciación Rápida página 7

ENGLISH
4. Create and format a partition on the CHD2UL
It is possible that the hard disk you are using is not partitioned/formatted yet. In this
situation the CHD2UL will not show a replaceable hard disk with partitions in your
operating system. To create and/or format the partition on the CHD2UL, you can use
the default Windows format utility, or the program Swissknife, which you can find on
the CD-ROM enclosed with the CHD2UL. This freeware software tool is a Windows
program used to create/format partitions in your hard drive.
The Swissknife application has to be installed with the "Setup.exe" file found in the
"\Swissknife\" folder.
Please check: http://www.compuapps.com/download/Swissknife/swissknife.htm for
updates of the Swissknife tool software.
1. Install the application SwissKnife
2. Connect the CHD2UL to the computer.
3. Run the program SwissKnife.
The following screen will appear:
4
4. Select the option "Partition and Quick Format" and select the hard disk
connected to "USB".
4
7