Controls And Connections - TrekStor PowerBoom mobile 150 Manual De Instrucciones

6) Controls and Connections

A) Micro-USB charging socket
B) Line-in jack
C) ON/OFF switch with Status-LED, bicolor
D) Volume control + title selector
E) Microfone
F) Multi-function key
G) Speaker
H) Metal mounting
7) Charging PowerBoom
Connect the micro-USB charging cable with the micro-USB charging socket
(A) on the PowerBoom and with the included USB charger for the power
outlet or connect it with a computer. While charging, the LED is red. Once the
device is fully charged, the red LED turns off.
If the battery becomes low, the red LED lights up every 4 seconds, and a
i
warning signal sounds.Charge PowerBoom as described above.
The maximum battery life becomes available after about 10 charge cycles.
i
8) Turning on PowerBoom
Press the ON/OFF switch (C) for 4 seconds until an ascending tone sounds.
PowerBoom is now on and in standby mode. The Bluetooth function is now
active and the status LED flashes blue rapidly.
EN
13