TrekStor PowerBoom mobile 150 Manual De Instrucciones página 14

9) Pairing PowerBoom with a Bluetooth® device.
a) Place the PowerBoom about 1 meter away from your device.
b) Turn the PowerBoom on (see 8).
c) Enable the Bluetooth function on your device. For more information,
please refer to your device's user manual.
d) If necessary, set up your device's visibility to other Bluetooth devices.
e) Enable your device to search for other active Bluetooth devices
in the vicinity.
f ) Select "PowerBoom_150" from the list of available Bluetooth devices
on your device, and pair your device with the PowerBoom.
g) Once the device and the PowerBoom are paired, the status LED turns
solid blue.
When using Bluetooth, ensure that the distance between the PowerBoom
i
and the paired device is not more than 10m.
You can break the connection by either disabling the Bluetooth function
i
of your device, or by turning off the PowerBoom.
10) Broadcasting music via Bluetooth
a) Turn on the PowerBoom (see 8) and connect the PowerBoom to your
device (see 9).
b) Start the music playback on your device. The music played will be
played automatically on your PowerBoom.
For some devices, the playback medium must first be determined.
i
Select "PowerBoom_150" as the playback medium in the menu displayed.
c) During playback, you can adjust the volume by briefly press "+" or "-"
on the volume control (D).
d) To skip to the next or previous track in the current playlist of the paired
device, press either ">>" or "<<" on the title selector (D) for 3-4 seconds.
e) To pause playback, briefly press the multi-function key (F).
To resume playing, briefly press the multi-function key again.
EN
14