16 7. Restoring The Operating System (Recovery); 16 7.1 Identifying The Installed Windows Version; 16 7.2 Downloading The Iso Installation File (Image); 16 7.3 Creating A Recovery Usb Stick - Bosch DCU 100 Manual Original

7. Restoring the operating
system (recovery)
For Windows 10, Microsoft has begun offering the ope-
rating system as "software as a service." This means that
the operating system will no longer be replaced by a suc-
cessor but instead continuously modified and expanded.
For some licensing models like the internet-of-things (IoT)
version of Windows 10, major modifications to the range
of functions are no longer covered by the existing license.
!
Always use the latest recovery version (image) for
the installed Windows version (e.g. Windows 10
Enterprise 2019 LTSB).
!
Different versions of Windows are not mutually
compatible and are also subject to different licen-
sing specifications. For this reason, the recovery
medium used during recovery must match the installed
Windows version.
Windows version Recovery version
Windows 10 LTSC 2019
Windows 10 LTSB 2016
Windows 10 LTSB 2015
7.1 Identifying the installed Windows
version
1. Select "This PC >> System properties."
2. The installed version is indicated in the "Device
specifications" area under "Windows specifica-
tions."
i
If the operating system cannot be started, the
Windows version installed can be found on the
licensing label. The licensing label is attached to
the underside of the housing, below the storage
battery, on the right.
Robert Bosch GmbH
Restoring the operating system (recovery) | DCU 100 | 23 |
Order number
V3.40 –
V2.10 1 687 005 134
V1.40 1 687 005 122
7.2 Downloading the ISO installation
file (image)
¶
Use the following link to download the current
image of the installed Windows version:
http://cdn.esitronic.de/TED/DCU100plus/Downloads/index.html
7.3 Creating a recovery USB stick
A recovery USB stick is required to perform the reco-
very. The recovery USB stick must be bootable. This
way, it is possible to launch the operating system from
the recovery USB stick even if there is no working ope-
rating system installed. The following is a description
of how any commercially available USB stick can be
turned into a bootable recovery USB stick.
7.3.1 Prerequisites
Due to the image's data volume (approx. 10 GB), the
following minimum prerequisites apply to the creation
of a bootable recovery USB stick.
Component Details
Data storage device
USB stick (min. 16 GB)
Available hard drive
≥ 10 GB
memory capacity
Installation file
Image of the required Windows
version (ISO file)
en
|
1 689 989 283 2021-01-24