Main Components List; Connection Diagrams - Elnur Gabarron ECOMBI PLUS ECO15 PLUS Instrucciones De Instalación

6.- CLEANING MAINTENANCE INSTRUCTIONS
Before cleaning, make sure the power has been turned off at the circuit breaker panel and that the heating element of the heater
is cool.
Occasionally, clean dust with a dry, soft cloth. Do not use any solvent or abrasive product for cleaning.
When the Heating season is finished, please disconnect the device by turning off the power switch located at the right back of
the unit or at the circuit breaker.
Any other servicing should be performed by an authorized technician.
ECOMBI PLUS has been manufactured under a fully assured quality system and using environmentally friendly processes. Once its
useful life is finished please take the device to a recycling depot so that its components can be recycled in an appropriate way.

7.- MAIN COMPONENTS LIST

Storage Heating Element (All except ECO15 Plus)
Storage Heating Element (ECOI5 Plus)
350W Balancing Heating Element (ECOI5/20 Plus)
450W Balancing Heating Element (ECO30 Plus)
600W Balancing Heating Element (ECO40 Plus)
Switch

8.- CONNECTION DIAGRAMS

LE BALANCING ELEMENT LIMITER
LR CUT OUT MANUALLY LIMITER
Ref. 15190091 Power PCB & Fixing Bracket
Ref. 15190875 Keyboard PCB ECO Plus
Ref. 15190111 Core Sensor
Ref. 15190121 Room Sensor
Ref. 15190131 110ºC Balancing Element Limiter
Ref. 46100530 135ºC Cut Out Manually Limiter
24
Ref. 15191890
Ref. 15191873
Ref. 15192140
Ref. 46102195
Ref. 15190725
Ref. 10190460