Inspection Log; Nameplate - ATH-Heinl Flex Lift 30 Manual Del Usuario

8.0

INSPECTION LOG

Check
The product must be checked after completion of the installation, handover, if necessary briefing and then
regularly in accordance with the applicable regulations and legal provisions in the country of operation by a
suitable and approved company or facility.
In the case of changes or extensions to the product type, an additional inspection book must be
maintained and accepted.
Scope of Inspection
In addition to perfect function, cleanliness and maintenance requirements, it is vital that the safety-relevant
components of the entire system are checked.
Technical Data
- Please refer to the enclosed operating instructions.

Nameplate

- Make a note of all the data below
- Manufacturer & type of mounting materials used:
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
This inspection manual (including log) is an important part
of the operating instructions and product.
!!!PLEASE STORE CAREFULLY!!!
Manufacturer ATH-Heinl GmbH & CO.KG
- 33 -