Switching The Appliance On - Rowenta INTENSE PURE AIR CONNECT PU608 Serie Manual De Instrucciones

SWITCHING THE APPLIANCE ON

Settingthepollutionsensors
The appliance is preset to medium sensitivity.
If the air quality indicator remains:
– poor after 2 hours in operation although the air seems to be purified
– excellent for more than 1 hour although the air seems to be polluted
you can adjust the sensor sensitivity as follows:
1. When the air purifier is off, hold down the mode setting button for 3 seconds:
2. Set the sensitivity by briefly pressing the mode setting button:
+ Blue
Low sensitivity
• Select high sensitivity if the air purifier indicates excellent air quality for more than 1 hour although the air
seems to be polluted.
• Select low sensitivity if the air purifier continues to indicate poor air quality even though it has been
operating for more than 2 hours and the air seems sufficiently purified.
3. Press 'Start/Stop' button to validate the sensitivity setting.
OPERATION
Start
Briefly press this button to switch the air purifier on or off.
• Modebutton(2)
– AUTODAY and AUTONIGHT mode: if the air quality level is excellent then the device does not run.
– Press this button to select one of the four modes. The corresponding indicator will turn on to
indicate the selected mode.
– Daytime auto mode: the fan speed is set to 1,2,3 or 4.
– Nighttime auto mode: The fan speed is set to 1 or 2.
– Quiet mode: The fan speed is set to minimum. Use this mode in quiet environments.
– Turbo mode: The fan speed is set to maximum. Use this mode when air quality is poor.
Light
You can change the light intensity of the appliance as you wish or according to the time of day.
Press Air quality indicator
1 Light up
2 Moderate light
3 Off
Ionizerfunction(onlyonPU6086)
The ionizer function releases negative ions into the air. This function is switched off by de fault.
To activate it, briefly press button 13.
16
+ Orange + Red
Medium sensitivity High sensitivity
Control panel
Light up
Moderate light
Moderate light
Timer/delayedstart
– Timer: When the appliance is on, you can use this button to define the operating duration.
Briefly press the button to select the number of operating hours desired (1, 2, 4 or 8) and the
appliance will automatically turn off at the end of the selected period.
– Delayed start: When the appliance is off, briefly press the button to set the appliance to turn on
in a certain number of hours (1, 2, 4 or 8).
3Dpureairfunction(adjustablegrid)
You can adjust the position of the air outlet grid manually, as desired. For an optimum, even flow
of purified air in the room, set the angle to 45°; for maximum comfort, set the angle to 90°.
ControlPanelLock
The lock system prevents the purifier from being accidentally mis-set during operation.
To activate it, press the button (7) for 3 sec until the locked control panel indicator turns on. To exit
this mode, press the button (7) again for 3 seconds, until the indicator turns off. When selected, the
other buttons are locked.
Wi-fifunction
Frequency band operated : 2400-2483,50MHz
Maximum radio-frequency power : 20dbm
To turn on or off the Wi-Fi function on your purifier, hold simultaneously the Wi-Fi button
the Light button during 3 seconds.
• When the Wi-Fi connection indicator
Reset
Press together the LIGHT + LOCK
First, the appliance will make a long bip to indicate Reset is launched. Then the appliance should
erase all data regarding pairing.
Once it's done, the product will turn off.
HOW TO CONNECT YOUR PURIFIER TO INTERNET
HOW TO CONNECT YOUR PURIFIER TO INTERNET ?
Download the app "Pure Air by Rowenta" & follow the instructions on your smartphone :
1. Sign in to create your 2. Make sure to stand close to the
Rowenta account if you are purifier during the pairing (2 meters
new. Or log in the app if you maximum) and make sure the
already have an account. purifier is located near a strong Wi-Fi
signal.
flashes it means that the purifier losts its connection.
buttons for 3 seconds.
3. Make sure your phone is connected
to your local Wi-Fi network (you'll
hear a "ding" sound and the Wi-Fi
indicator will flash to indicate that
your mobile device is successfully
connected to Wi-Fi.)
EN
and
17