Bosch AVENAR 8000 Guia De Instalacion página 42

42 en | Installation
Pos. Designation
E Power button
F Product label
G DIP switch
label
H Power supply
I 6-pin DIP
switch
J 18 LEDs
3 Installation
Notice!
The maximum installation height is 2 m!
Follow the mounting instructions according to the mouting
variant for your application.
4
Mounting
variants
Surface wall
mounting
Flush wall
mounting
Tilted
installation
2020.05 | 8.0 | F.01U.347.558
Function
Shutdown and restart of the device
Important product data
DIP switch label with areas to write down the PNA
(Physical Node Address) and the IP address
DC1 / DC2
DIP switch settings for CAN bus networking & panel
redundancy
Indicating the operating status
Before mounting the housing, remove the operating unit.
This prevents the touch screen being damaged and
facilitates installing the lower mounting screws.
Illustration
See 02, page 5 ,
I
See 02, page 5 ,
II
See 02, page 5 ,
III
Mounting Instructions
See 03, page 6 to 05, page 8 (step 1 to
12) and 06, page 9
See 03, page 6 to 05, page 8 (step 1 to
12) and 07, page 10
Bosch Sicherheitssysteme GmbH
AVENAR keypad 8000