Installation; Mounting - NEC LED-A019i Manual De Configuración

Póster led
Ocultar thumbs Ver también para LED-A019i:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41

Installation

For box contents, please refer to the printed contents sheet provided in the box.
CAUTION:
This device cannot be used or installed without the Pedestal stand or other mounting accessory for
support. For proper installation it is strongly recommended to use a trained, NEC authorized service
person. Failure to follow NEC standard mounting procedures could result in damage to the equipment
or injury to the user or installer. Product warranty does not cover damage caused by improper
installation. Failure to follow these recommendations could result in voiding the warranty.
• MOVING OR INSTALLING THE LED Poster MUST BE DONE BY TWO OR MORE PEOPLE.
Failure to follow this caution may result in injury if the LED Poster falls.

Mounting

CAUTION:
For customer:
DO NOT mount the LED Poster yourself. For proper installation it is strongly recommended to use
a trained, qualified technician. Please contact your supplier as they may be able to provide a list
of qualified installation professionals. Mounting on a wall or ceiling and hiring a technician is the
customer's responsibility.
Maintenance
• Periodically check for loose screws, gaps, distortions, or other problems that may occur with the
mounting equipment. If a problem is detected, please refer to qualified personnel for service.
• Regularly check the mounting location for signs of damage or weakness that may occur over
time.
DO NOT block ventilated openings with mounting accessories or other accessories.
For NEC Qualified Personnel:
Stability Hazard.
The device may fall, causing serious personal injury or death.
To prevent injury, this device must be securely attached to the floor/wall in accordance with the
installation instructions.
Carefully inspect the location where the unit is to be mounted. Not all walls or ceilings are capable
of supporting the weight of the unit. Weight of this LED Poster is mentioned in Specification. Product
warranty does not cover damage caused by improper installation, re-modeling, or natural disasters.
Failure to comply with these recommendations could result in voiding the warranty.
To ensure safe installation, use two or more brackets to mount the unit. Mount the unit to at least two
points on the installation location.
English-6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Led-a025i

Tabla de contenido