DWT HLP16-500 Manual Original página 8

• While operating do not point the nozzle at yourself,
other people or animals, and do not touch the nozzle
or the surface that you have heated - you may be badly
burnt�
• Do not close ventilation slots of the hot air gun, do
not close the nozzle of the hot air gun and do not hold
the nozzle too close to a work surface - this will cause
the power tool to overheat and break down�
• Ensure proper ventilation in the room where opera-
tion will take place - gases and vapors generated dur-
ing operation may be harmful to your health�
• Wear safety goggles and gloves during operation�
• Do not direct the hot air flow to the same place for
a long period of time - heat treatment of lacquer and
paint coatings may produce highly flammable gases.
• Do not work next to highly inflammable liquids, gas-
es and items (timber, paper, etc�)�
• Beware of ignition of surrounding objects due to high
temperature of an air flow. Remember, invisible design
components (wooden beams, insulation materials,
etc.) can catch fire as well.
• During a steady-state operation put the power tool
on a horizontal dry surface to avoid its toppling� Do not
leave the power tool running unattended�
After finishing operation
• After the final shut-off, examine a place where works
were carried out, do not leave decaying subjects - they
can cause a fire.
• After operating the power tool, let the nozzle cool
down completely, and only then remove the power tool�
Symbols used in
the manual
Following symbols are used in the operation manual,
please remember their meanings� Correct interpretation
of the symbols will allow correct and safe use of the
power tool�
Symbol Meaning
Serial number sticker:
HLP ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear ear protectors�
Wear a dust mask�
Symbol
power tool designation
The hot air gun is designed for heating a work surface
by means of blowing with a hot air blast�
[HLP20-600 K]
It also offers the possibility of weakly heated (50°С)
blowing on a work surface� This allows for the effective
performance of different types of work�
English
8
Meaning
Wear protective gloves�
Disconnect the power tool
from the mains before instal-
lation or adjustment�
Ensure adequate operation
room ventilation�
Movement direction�
Rotation direction�
Locked�
Unlocked�
Double insulation / protec-
tion class�
Attention� Important�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Useful information�
Do not dispose of the power
tool in a domestic waste
container�
DWT