Pre-Installation; Planning Installation; Tools Required; Hardware Included - Huskie Tools 45202 Manual De Instrucciones

Pre-Installation

PLANNING INSTALLATION

Decide where and how high you would like your track wall section installed.
You must start and finish on studs.
Studs should be centered 16 in. apart in order to support 75 lbs per square foot.
NOTE: In order to support 75 lbs per square
foot, your studs must be a maximum of 16 in. apart.

TOOLS REQUIRED

Stud finder
Drill

HARDWARE INCLUDED

AA
Part Description
AA
Square-head bit # 2
BB 2 in screws
(Dual Robertson & Phillips Pan head #8)
Level
Mitre saw
If you plan on
cutting your panels
NOTE: It is strongly recommended to use a drill
with the included square-head bit for all driving.
BB
Quantity
1
88
3
Please contact 1-888-HD-HUSKY for further assistance.
Pencil
Snips
For cutting trims
to length.
HUSKYTOOLS.COM