LOWES ORIGIN 21 F12A0010CP Manual Del Usuario página 4

SAFETY INFORMATION
• This product is engineered to meet the EPA WaterSense flow requirement. The flow rate is
governed by the aerator or flow controller. If replacement is ever required, be sure to replace it with
a WaterSense compliant aerator or flow controller to retain the water conserving flow rate of this
product.
• The automatic compensating valve shall be used with shower rated at 1.3 gpm (4.9 L/min) or higher.
• The shower shall be used with automatic compensating valve rated at 1.43 gpm (5.4 L/min) or less.
• The product should be installed by a locally licensed plumber.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 40 minutes
If you are replacing your plumbing valve, please review the four common plumbing methods illustrated
below: CPVC, PEX, IPS, and Copper. Remove the existing handle and valve trim before replacing your
valve. Please follow all local building and plumbing codes.
YOU MAY ALSO NEED
A.CPVC-1
A. CPVC
Use 1/2" Copper or
IPS Pipe Only
CPVC Cement
CPVC
Cement
Tubing Cutter
Tubing SharkBite Fittings
Cutter
A.CPVC-2
Use 1/2" Copper or
IPS Pipe Only
SharkBite Fittings
4
CPVC Cleaner
CPVC
Cleaner