- Close the cover of the battery
compartment.
- It is essential that the batteries
should always be the same kind and
the same charge. Never mix alkaline
batteries with normal one (Carbon-
Zinc) and/or rechargeable ones.
- NB: When changing the batteries,
the configuration of the appliance
will be removed, and you will need to
reset the parameters of the appliance.
Instructions for use
Before use:
- Prepare the appliance according to
the desired weight unit:
Weighing units selector Kg/Lb/st
- The appliance has a selector of
weighing units, put the selector in
the position according to those units
you want to work with. To do so, press
the "unit" button, the measuring unit
selected will then be shown on screen
one after the other. (Fig .2)
Use:
Weighing system
- Gently place your foot on the
surface of the scale to start it, and
wait until the "0.0" symbol appears
in the display.
- Place yourself in the centre of the
platform avoiding abrupt movements,
maintaining immobile and without
touching other objects, until the
appliance shows your weight.
Manual Munich.indb 11
Automatic disconnection function
(stand-by):
- To save energy, the appliance goes
to standby mode after several seconds
of inactivity.
- To return to normal functioning,
simply place your foot gently on the
platform and wait until the "0.0"
symbol appears in the display.
Once you have finished using the
appliance:
- Remove the batteries from the
appliance if you are not going to use
it for some time.
Special messages:
The following messages can appear
on the screen:
- Er: means that the body fat percen-
tage measurement error.
- Lo: means that the battery has to be
changed/recharged.
Cleaning
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
- Do not submerge the appliance in
water or any other liquid, or place it
under a running tap.
Supplies
- Only the following type of supplies
must be used with the appliance.
(Fig. 3)
05/11/13 15:08