Windows 7/Vista - Trust 17528 Guía De Instalación Rápida

Wireless Audio Set - USER'S MANUAL
Installation
A Power Button
1
B Power Adapter socket
C 3.5mm Audio output
D Cinch Audio output
E LED light indicator
F USB receiver
G USB extension cradle
H Power Adapter
- Put the USB receiver in the extension cradle.
2
- Connect the extension cradle to your computer.
- Connect the power adapter to the device.
3
- Connect your speakers or sound system to the device (use the
- Press the power button on the wireless audio set.
4
The LED light indicates the connection status:
5
- LED blinking, not connected (normal when starting).
- LED constant on, connected.
Configuration

Windows 7/Vista

Go to 'Playback Devices' to configure the wireless device.
6
Set the '2.4G Wireless Transceiver' as your default device.
7
Windows XP
Go to 'Adjust Audio Properties' to configure the wireless device.
8
Go to the 'Audio' tab.
9
Set the default device to '2.4G Wireless Transceiver'.
10
C 3.5mm or the D
Cinch output).
2