Publicidad
Idiomas disponibles
Idiomas disponibles
Tools Needed:
•
15 mm socket/wrench
•
Reciprocating Saw with Metal Cutting Blade
•
Pry Bar
Optional Supplies:
•
Assembly Lubricant
Eye Protection Warning
Warning: Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal
injury.
Fastener & Hardware Caution
Caution: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that
application. Do not use paints, lubricants, or corrosion inhibitors on fasteners, or fastener joint surfaces, unless specified. These
coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and
specifications when installing fasteners in order to avoid damage to parts and systems. When using fasteners that are threaded
directly into plastic, use extreme care not to strip the mating plastic part(s). Use hand tools only, and do not use any kind of impact
or power tools. Fastener should be hand tightened, fully seated, and not stripped.
Exhaust Caution
Caution: Never work on a hot exhaust system. Serious injury in the form of burns can result. If the vehicle has been in use and
the exhaust system is hot, allow vehicle to cool for at least 1 hour. Always wear eye protection when working under any vehicle.
Warning: Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal
injury.
Note: It is our recommendation that you use a hoist or hydraulic lift to facilitate the installation of your new Performance Parts
Exhaust upgrade package.
Included Parts
1) Right Muffler Assembly (Qnty. 1)
2) Left Muffler Assembly (Qnty. 1)
3) Y-pipe (Qnty. 1)
4) Mid-pipe (Qnty. 1)
5) 3" Exhaust Clamp (Qnty. 1)
6) 2.25" Exhaust Clamp (Qnty. 3)
7) Chevrolet Performance Emblem (Qnty. 1) – Not Pictured
8) Installation Sheet (Qnty. 1) – Not Pictured
Note: Please confirm that all parts are present before beginning the factory exhaust system removal and performance exhaust
system installation.
Chevrolet Performance Exhaust –
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
3
5
Gen 6 Camaro 4 Cylinder (LTG)
1
6
4
84578425
IR 22MY18
PART NO.
DATE
22MY18
Initial Release - Benjamin Kaminsky
2
2
SHEET
REVISION
21
OF
AUTH
N/A
Publicidad
