Descargar Imprimir esta página

HoMedics QRM-400 Guia De Inicio Rapido página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

Quad-Roller Massaging Cushion
Moving Quad-Roller Massage Mechanism
Power Button
To turn on the massage
functions, first press the
POWER button. The L.E.D.
indicator will illuminate and
confirm your selection. To
turn off the massage
functions, simply press the
Shiatsu Massage
button again. The L.E.D.
indicator will blink while
Shiatsu is a deep
the massage mechanism
kneading massage.
returns to its lowest point
Shiatsu Programs
and then it will turn off.
Choose from 3 preset
programs where the Shiatsu
massage travels up and down
in a specific area of the back.
NOTE: The moving
To select a program, simply
massage mechanism
press the button and the L.E.D.
always "parks" or
will illuminate. To deselect,
finishes in its lowest
press the button again or press
position. It will
another button.
continue to this
Spot Shiatsu
position after the
While the unit is in Shiatsu
power has been
massage, press either button to
turned off. If the
stop and focus the Shiatsu
electrical supply is
action in one place. Once the
interrupted, when
unit is operating in Spot
power is restored,
Shiatsu, you may adjust the
the mechanism will
mechanism position by
"park" or move to
holding down either button
its lowest position.
until the desired position is
Power Adaptor
reached. The Up Arrow will
The Quad-Roller
move the mechanism upwards
Massaging Cushion is
and the Down Arrow will move
powered by a custom 120
it down. Once you release the
volt AC adaptor, which is
button, the mechanism will
included with your unit.
stop in that place.
6
Demo Button
For a brief demonstration of the features of the Quad-Roller
Massaging Cushion, press the Demo button. The unit will
complete one cycle combining Shiatsu and Rolling
massage. Once complete, the unit automatically turns off.
Rolling Massage
Rolling is like two hands working slowly up and down
along your spine.
Width Adjustment
While the unit is in Rolling massage, press this button to
adjust the distance or width between the massage heads.
This adjustment changes the area that is massaged along
your spine. With each press, the massage heads will move
to the next available position.
Rolling Programs
Choose from 3 preset programs where the Rolling massage
travels up and down in a specific area of the back. To select
a program, simply press the button and the L.E.D. will
illuminate. To deselect, press the button again or press
another button.
NOTE: There is a 15-minute auto shut off
on the unit for your safety.
Removable Flap
Remove for a more
intense back massage.
Moving Quad-Roller
massage mechanism
With L.E.D. illumination
7

Publicidad

loading