Tools Required; Hardware Included - LANDMANN heatwave 28051 Montaje Y Uso

Hardware

TOOLS REQUIRED

Phillips
screwdriver

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.
AA
(30) M6 x 12mm Bolts
Assembly
1
Assembling the firebowl
handle
Assemble the firebowl handle (T1) to the
front of the firebowl (E1) using two bolts (AA), two
hexnuts (BB) and two washers (DD).
Assemble the bolts and washers from inside
the firebowl. Tighten bolts securely.
DD
BB
T1
Adjustable
wrench
BB
(30) M6 Hexnuts (2) M6 Capnuts
AA
CC DD
(10) Washers
2
Assembling the front legs
Assemble the two front legs (L1) to the firebowl (E1) using
four bolts (AA), four washers (DD) and four hexnuts (BB).
Finger tighten the bolts only at this time.
E1
L1
5
EE
(2) M8 Locknuts
KEEP ROUND
EDGE TOWARDS
THE CENTER OF
FIREBOWL
DD
BB
AA
E1