Sage the Combi Wave 3 in 1 Guía Rápida página 32

At the end of the 3-minute preheating program,
an alert tone will sound, and the screen will
indicate 'INSERT FOOD ON PAN'. Open the
door to place the food on pan, and press START
to continue. Lay the chicken nuggets flat in a
single layer.
Two thirds of the way through the cook
program, an alert tone will sound, and STIR/
TURN will flash. Open door or press STOP/
CLEAR button once to pause. Turn the chicken
nuggets and press START to continue the
cooking program.
Fries
The SMART COOK FRIES setting is designed
to air fry French fries in the microwave oven.
The cook time is based on fries that have been
taken directly from the freezer (approx. -18°C).
Turn the ADJUST dial to select the amount
of fries to air fry and press START to begin
cooking. You can select from 200g to
450g of fries.
When selecting the SMART COOK FRIES
setting, the LCD screen will show 'PREHEAT
PAN ONLY'. Place the Combi Crisp with pan
legs unfolded inside the microwave for the
preheating program.
At the end of the 3-minute preheating program,
an alert tone will sound, and the screen will
indicate 'INSERT FOOD ON PAN'. Open the
door to place the food on pan, and press START
to continue. Lay the fries flat in a single layer.
Halfway through the cook program, an alert
tone will sound, and STIR & TURN FOOD is
displayed on the screen. Open door or press
STOP button once to pause. Turn the fries and
press START to continue the cooking program.
32
Chicken
The SMART COOK CHICKEN setting
is suitable for fresh chicken pieces as well
as cooking whole chickens. This setting
uses convection and grill, with the addition
of microwave power when cooking a
whole chicken.
Cook times are based on chicken directly from
the refrigerator (approx. 5°C).
Minimum amount of chicken to be cooked is
200g and maximum is 1.6kg.
• 200g to 500g suitable for chicken fillets and
boneless chicken pieces.
• 1kg to 1.6kg suitable for chicken pieces with
bones and whole chickens.
Use the provided Combi Crisp pan to cook
the chicken. For chicken pieces, use the
Combi Crisp pan with the pan legs set in the
unfolded position. For whole chicken, use the
Combi Crisp pan with the pan legs set in the
folded position.
Halfway through the cook program, an alert
tone will sound, and STIR & TURN FOOD
is displayed on screen. Open door or press
STOP button once to pause. Turn the chicken
pieces (not necessary when cooking a whole
chicken) and press START to continue the
cooking program.
Once cooking has finished, allow chicken to
stand for 5 minutes.