Hinkley 980003 Instrucciones De Instalación página 2

OPERATING INSTRUCTIONS
A. 1, 2, 3, 4, 5 and 6 buttons:
These six buttons are used to set the fan speed as follows:
1= minimum speed
2= low speed
3= medium low speed
4= medium speed
5= medium high speed
6= high speed
B. button:
This button turns the fan off.
C. The " " button:
The " " button turns the upper light ON or OFF and also
controls the brightness setting. The "
light ON or OFF. Press and hold the button to set the desired
brightness. The light key has an auto-resume, it will stay at the same
brightness as the last time it was turned off.
D. The " " button is used to set the fan forward or reverse, press
the button forward (for warm weather) or reverse (for cool weather).
E. "DIM" and "ON/OFF" dip switch: (Refer to Fig. 1)
The "DIM" selection is the light dimmable selection and is to be
used with all bulbs execpt for CFL bulbs. The "ON/OFF" selection
is the light on only (no dimmable function) and is to be used with
CFL and LED bulbs as CFL bulbs cannot be dimmed properly.
NOTE: To operate the reverse function on this fan, press the reverse
button while the fan is running.
For Warranty Information please visit www.hinkley.com
" button turns the bottom
6 5
4 3
2 1
0
Fig. 3