METRICA Flash Green 360 Manual Del Usuario página 8

or expose it to high temperatures. The housing and
some internal parts are made of plastic and may de-
form at high temperatures.
- External plastic parts can be cleaned with a damp
cloth. Although these parts are solvent resistant,
NEVER use solvents. Use a soft, dry cloth to remove
moisture from the tool before storing it.
- Do not dispose of this product with household wa-
ste.
SAFETY
- While the product is operating, be careful not to
expose your eyes to the emitting laser beam (green
light source). Exposure to a laser beam for an exten-
ded period of time can be hazardous to the eyes.
- Do not stare directly at the beam, do not look directly
at it with optical instruments and do not place the
laser at eye level.
- Do not disassemble the laser instrument. There are
no user-serviceable parts inside.
- Do not modify the laser in any way. Modifying the in-
strument may result in dangerous exposure to laser
radiation.
- Do not operate the laser around children or allow
children to operate the laser.
- Exposure to a Class 2 laser beam is considered safe
for a maximum of 025 seconds. Eyelid reflections
will normally provide adequate protection.