Device Controls And Indicators; Storage, Handling And Removal Instructions; Storage And Handling; Removal Instruction - Hillrom AMATECH JUNIOR STIRRUPS Instrucciones De Uso

INSTRUCTIONS FOR USE
11. Grasp and squeeze Release Handles and simultaneously move legs slowly to
desired height, maintaining leg symmetry.
12. Once lithotomy level has been achieved, check for pressure points and, if
necessary, make appropriate adjustments.
NOTE: Patient leg position symmetry can be documented using leg length
indicator markings on the Stirrup posts.

3.3 Device controls and indicators:

The indicators below are placed on the sole of each boot.

3.4 Storage, Handling and Removal Instructions:

3.4.1

Storage and Handling:

The product should be stored in a clean and safe environment to prevent product
damage. See storage Specifications under Product Specification section.
3.4.2

Removal Instruction:

a. Lower Stirrups by grasping and squeezing the Release Handles and
simultaneously down staging the legs slowly to the desired level. A.O.R.N.
recommends the lowering and staging process take two full minutes. Gently
remove patient's legs from Stirrups.
b. Stirrups should be in horizontal position for removal from Rail Clamp slot. Loosen
clamp and remove Stirrups.
Document Number: 80028262
Version: B
This Symbol represent the patient's right foot.
This Symbol represent the Patient's left foot
Page 14
Issue Date: 20 MAR 2020
Ref Blank Template: 80025118 Ver. E