Bigben BB4402 Guia Del Usuario página 2

Thank you for purchasing the Bigben Interactive controller. This product has been designed to enhance
your console.
Please keep this instruction manual for future reference. If you require any assistance or help please
contact the Helpline.
Warranty
This product bearing the Bigben Interactive trademark, is guaranteed by the manufacturer for a period
of 1 year from the date of purchase, and will, during this period be replaced with the same or a similar
model, at our option, free of charge, if there is a defect due to faulty material, or workmanship. This
guarantee does not cover defects arising from accidental damage, misuse or wear and tear, and is
available only to the original purchaser of the product. This does not aff ect your statutory rights.
Features:
• Wireless Bluetooth®.
• 2 vibrating motors.
• Six axis motion technology.
• Action buttons.
• Analog controller and D-pad.
• Rechargeable battery: 700mAh Li-Polymer.
You will need to charge the battery before use.
• Plug the controller (containing its rechargeable battery)
into your console or a computer with a USB port.
• Your console must be fully switched on for charging to commence.
Charging will not start if the console is in standby mode.
Charge time: 3 Hours
Synchronise your controller to your console by doing the following:
• Turn on your console.
• Plug the USB cable provided into your controller and connect it to your console.
• The LEDs on your controller will start fl ashing.
• Press the HOME button on your controller.
• The LEDs will light up indicating your player number.
(For example, if no other controllers are switched on then the fi rst LED will light up)
• Please note that initial synchronisation may take up to 10 seconds.
• Unplug the USB cable and enjoy full use of your wireless controller.
TROUBLESHOOTING
Controller is not working.
• Ensure that the power button is the 'On' position.
• Check that the batteries are not low.
EN