Philips Cucina HR7633 Instrucciones De Uso página 8

ENGLISH
8
each other.The projection of the lid will
now cover the opening of the handle.
Feed tube and pusher
C
1 Use the feed tube to add liquid ingredients
and/or solid ingredients. Use the pusher to
push ingredients down the feed tube.
C
2 You can also use the pusher to close the
feed tube in order to prevent ingredients
from escaping through the feed tube.
Blade
The blade can be used for chopping, mixing,
1
blending, pureeing and preparing cake
mixtures.
CLICK
2
C
1 Put the bowl on the motor unit.
C
2 Remove the protective cover from the
blade.
The cutting edges of the blade are very sharp
Avoid touching them!
C
3 Put the blade on the tool holder.
C
4 Put the tool holder in the bowl.
5 Put the ingredients in the bowl. Pre-cut
large pieces of food into pieces of approx.
3 x 3 cm. Put the lid on the bowl.
C
6 The buttons allow you to adjust the speed
of the appliance to obtain optimal results.
'PULSE/0' button: for pulse operation and for
B
turning the appliance off. If the 'PULSE / 0' button
is pressed, the appliance runs at the highest
speed.The appliance stops running when the
button is released.
button 1: for normal speed.
B
button 2: for high speed.
B
See the table for the recommended speeds.
Processing takes 10 - 60 seconds.
Tips
The appliance chops very quickly. Use the
pulse function for short periods at a time, to
prevent the food from becoming too finely
chopped.
Do not let the appliance run too long when
you are chopping (hard) cheese.The cheese
will get too hot and will start to melt and
become lumpy.