Fuse Replacement - Chauvet Bubble King Guía De Referencia Rápida

EN
What Is
Included
Product
Description
Product Overview
Mounting
AC Power

Fuse Replacement

• One Bubble King™
• One Power Cord
• One Fluid Tank
The Bubble King™ is the largest name in bubble effects, featuring 3 double
wands, a manual bubble button, and extremely high output for when you
need bubbles for a large area.
Remote/On/Off Switch
Before mounting this product, read the Safety Notes. Place bubbler on a flat,
level surface or use the mounting brackets provided. Ensure that the bubbles
are not shooting directly in anyone's face or above heavy traffic areas, as
bubble fluid leaves a slippery surface. The bubble machine must not have
more than a 5º angle of inclination.
This product has a voltage-specific power supply that can work with an input
voltage of 120 VAC, 60 Hz or 230 VAC, 50 Hz.
1. Disconnect this product from the power outlet.
2. With a Phillips #2 head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove the blown fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back into place and reconnect power.
Bubble King ™ (B-550) QRG
• One Warranty Card
• One Quick Reference Guide
Power In &
Remote In
Fuse holder
3
Mounting Bracket
Adjustment Knob