Operating Peripheral Equipment - Panasonic TC-32LX700 Guia De Inicio Rapido

Operating Peripheral Equipment

You can operate other manufacturers' equipment using this TV's remote control.
■
Press to return to the TV
mode
Caution
•
Registration will fail if the wrong code is input or it takes more than 30 seconds to register.
This procedure searches all codes and is called the "sequence method."
After step above, change the code and
test
change
Operate the equipment with the remote
control (p. 40)
•
Repeat until the code is found
•
It may take many attempts before the correct
code is found
1
Connect the external equipment to the TV and
Power Off the external equipment
2
+
3
4
5
To find a code not listed in the code list
Press both buttons simultaneously for
more than 3 seconds.
•
Release the buttons when the equipment selection
buttons start flashing.
Select the equipment
with the equipment selection button
•
The selected button remains lit (other buttons are not lit).
Input the equipment's 4-digit remote
control code
(p. 41-43)
Operate the equipment with the remote
control
(p. 40)
•
The external equipment turns On.
■
If the equipment does not operate with the
remote control
•
When your equipment has a single code
Input the remote control code again
•
When your equipment has multiple codes
Change the code with
When the correct code is found
store
above and test again
37