Delivery Scope; Intended Use; Tool Specifications; Ec Declaration Of Conformity - Würth BS 14-A LIGHT Traducción Del Manual De Instrucciones De Servicio Original

Symbol Meaning
Reaction direction
Right/left rotation
Drilling and screwdriving
Low speed
High speed
Switching On
Switching Off
T Permitted ambient temperature
1
during charging
T Permitted ambient temperature dur-
2
ing operation* and during storage
* Limited performance at tempera-
tures <0 °C
Recommended batteries
Recommended chargers
U Rated voltage
n Impact rate
S
n 1 No-load speed (1st gear)
0
n 2 No-load speed (2nd gear)
0
M Maximum torque according to
ISO 5393
Brickwork
Metal
Wood
Ø Drilling diameter, max.
Ø Max. screw dia.
Chuck clamping range
Symbol Meaning
Weight according to
EPTA-Procedure 01/2003
* Value depending on the battery
pack being used
L Sound power level
wA
L Sound pressure level
pA
K Uncertainty
a Vibration total value
h

Delivery Scope

Cordless Drill/Driver.
Battery, application tools and other accessories shown or
described are not part of the standard delivery scope.
A complete overview of accessories can be found in our
accessories program.

Intended Use

The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramics and plastic.
For damage caused by usage other than intended, the user is
responsible.

Tool Specifications

The tool specifications of the machine are listed in the table on
page 178.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries, these
values can vary.
EC-Declaration of Conformity
We declare under our sole responsibility that the product
described under "Technical Data" is in conformity with all rel-
evant provisions of the directives 2011/65/EU,
2014/30/EU, 2006/42/EC including their amendments
and complies with the following standards:
EN 60745-1, EN 60745-2-1, EN 60745-2-2.
13