CONTROLPANEL
REMOTE CONTROL SIGNAL RECEIVER
ITIMER
- TEMPERATURE SETTING
• Use these buttonsto automatically control the
temperatureof the room.The temperature
can be set to one of a temperature between
64°F to 82°F.
• Push the TEMP up or down buttonsto shift
the temperature setting from
82°F It,.76°F •70°F •64°F
- SHUT-OFF TIME
,,You will usuallyuse shut-off time while yousleep.
• If unit is nJnning,Usetimertoset numberof hours untilshut-off.
• Everytime you pushTimerbutton,it advancesthe Timer
settingas follows:1 Hour• 3 Hours• 6 Hours1_10 Hours
maximum.
"To tam the air conditionerON, pushthis button.
To turn the air conditionerOFF,push
the buttonagain.
• This buttontakes priorityoverany otherbutton.
• When you first turn it on, the air conditioneris on
the Highcool mode andthe Temp. at 70°F.
AUTO RESTART
• Inthe eventof a power failure,
the unitwillrunat theprevious.
- STARTTIME
• if unitis off, Usetimerto setnumberof hours before unitstarts.
• Everytime you pushTimerbutton,itadvancesthe Timersettingas follows:1 Hour• 3 Hours• 6 Hours• 10 Hours
maximum.
MODE
• Pushthis buttonto shiftthe modeof operation from COOL-HI• COOL-LOW•FAN ONLY-HI• FANONLY-
LOW.
HORIZONTAL
AIR DIRECTION
CONTROL
The horizontal a ir directionis adjusted by movingthevertical
louversrightandleft withyourfingertips.(FIG.15)
VERTICAL
AIR DIRECTION
CONTROL
The verticalair directionis adiustad by movingthe horizontal
louversup anddownwithyourfingertips.(FIG.16)
FIG. 15
FIG. 16
-10-