Manuales relacionados para Next Level Racing SEAT ADD ON
Resumen de contenidos para Next Level Racing SEAT ADD ON
- Página 1 INSTRUCTION MANUAL FOR NEXT LEVEL RACING SEAT ADD ON/ GTULTIMATE For assistance please contact: support@nextlevelracing.com www.nextlevelracing.com...
- Página 2 Thank-you for purchasing a Seat Add On/ GTultimate If you require any support with your product please contact our friendly team at: support@nextlevelracing.com for a prompt response.
-
Página 3: What's In The Box
SEAT ADD ON/ GTULTIMATE What’s In The Box: For assistance please contact: support@nextlevelracing.com www.nextlevelracing.com... - Página 4 SEAT ADD ON/ GTULTIMATE Step 1: Centre Bar M8 35MM BOLTS U Shape Bar M8 15MM BOLTS Install SIDE PANELS to U SHAPE BAR using 2 x M8 35MM BOLTS and CENTRE BAR using 2 x M8 15MM BOLTS. STOP IF USING MOTION PLATFORM, REFER TO MOTION PLATFORM...
- Página 5 SEAT ADD ON/ GTULTIMATE Step 3: Feed through longest straps of harness through seat headrest holes. Attach 2X CROSS HEAD SCREWS to frame under back of seat. Step 4: Attach support bars from U SHAPE BAR to frame under seat using 2X M6 10MM BOLTS.
- Página 6 SEAT ADD ON/ GTULTIMATE Step 5: T Pole Attach T POLE under seat using 2X M8 15MM BOLT. (Left or right side depending on gear shifting preference) Step 6: Gear Shifter Adaptor T Pole Gear Shifter Plate Attach GEAR SHIFTER ADAPTOR to T POLE using 2X M8 15MM BOLTS. Attach GEAR SHIFTER PLATE to GEAR SHIFTER ADAPTOR using 1X M8 15MM BOLT.
- Página 7 SEAT ADD ON/ GTULTIMATE GEAR SHIFTER ADAPTOR reversible to be further or closer. Step 7 (OPTIONAL): If you own the Buttkicker Gamer 2, attach the optional BUTTKICKER ADAPTOR using holes underneath seat framing. Install with 2X M8 35MM BOLTS. For assistance please contact: support@nextlevelracing.com...
- Página 8 SEAT ADD ON/ GTULTIMATE LUMBAR CUSHION Step 8: Position LUMBAR CUSHION to support lower back. Feed strap through seat and clip into position. For assistance please contact: support@nextlevelracing.com www.nextlevelracing.com...
- Página 9 SEAT ADD ON/ GTULTIMATE GTULTIMATE SETUP Step 9: Attach WHEEL STAND to SEAT ADD ON using 2X M8 85MM BOLTS. For assistance please contact: support@nextlevelracing.com www.nextlevelracing.com...
- Página 10 SEAT ADD ON/ GTULTIMATE FLATTENING/ ADJUSTING PEDAL PLATE ANGLE Step 10 (OPTIONAL): For customers that need angle of pedal plate flatter or have high performance pedals that require stronger support Remove M8 BOLT in hinge in middle of pedal plate.
- Página 11 SEAT ADD ON/ GTULTIMATE NEED ASSISTANCE? If you require any support with your product please contact our friendly team at: support@nextlevelracing.com for a prompt response. For assistance please contact: support@nextlevelracing.com www.nextlevelracing.com...
- Página 12 SEAT ADD ON/ GTULTIMATE FOLDS FOR EASY STORAGE For assistance please contact: support@nextlevelracing.com www.nextlevelracing.com...
- Página 13 Provlečte pás sedadlem a připevněte jej do správné polohy. GTultimate Setup: Krok 9: Pomocí ŠROUBŮ 2X M8 85MM připojte WHEEL STAND k SEAT ADD ON. Zploštění / seřízení úhlu pedálové desky Krok 10 (nepovinný): Pro zákazníky, kteří potřebují plošší úhel nastavení pedálové desky nebo mají vysoce výkonné...
- Página 14 Voed de riem door de zetel en klik op zijn plaats. GTultimate Setup: Stap 9: Bevestig WHEEL STAND SEAT aan de SEAT ADD ON d.m.v. 2X M8 85MM BOLTS. Het afvlakken / aanpassen van de hoek van de pedaalplaat Stap 10 (optioneel): Voor klanten die een hoek of pedaal afvlakker nodig hebben of die hoge performante pedalen hebben die meer steun vereisen Verwijder de M8 BOLT in de scharnier in het midden van de pedaalplaat.
- Página 15 Faites passer la sangle à travers le siège et encliquetez-la. GTultimate Setup : Étape 9 : Fixez le WHEEL STAND au SEAT ADD ON à l’aide des boulons 2X M8 85MM. Aplatissement/ Ajustement de l’angle de la plaque pour pédalier Étape 10 (Facultative) : Pour les utilisateurs désirant avoir une plaque pour pédalier à...
- Página 16 Passaggio 8:Posizionare il LUMBAR CUSHION come supporto alla zona lombare. Far passare la cinghia attraverso il sedile e aggangiarla in posizione. GTultimate Setup: Passaggio 9: Collegare il supporto WHEEL STAND al sedile SEAT ADD ON utilizzando le viti 2X M8 85MM BOLTS. Abbassare/ Regolare l’angolo della pedaliera Passaggio 10 (opzionale): Nel caso in cui vi sia la necessità...
- Página 17 Pase la correa por el asiento y engánchela en la posición. GTultimate Setup: Paso 9: Instale el WHEEL STAND en el SEAT ADD ON usando los 2X TORNILLOS M8 DE 85 MM. Aplanar/ajustar el ángulo de la placa del pedal Paso 10 (opcional): Para clientes que necesiten un ángulo de placa del pedal más plana o tengan pedales de...
- Página 18 Führen Sie den Gurt durch Sitz und Clip in Position. GTultimate Setup: Schritte 9: Befestigen Sie WHEEL STAND zu SEAT ADD ON mit 2X M8 85MM BOLTS. Abflachung / Einstellen des Pedal-Plattenwinkels Schritte 10 (Optional): Die Kunden, die flachere Winkel der Pedalplatte benötigen, oder Sie haben Hochleis- tungspedale, die eine stärkere Unterstützung erfordern...
- Página 19 SEAT ADD ON/ GTULTIMATE AVAILABLE ACCESSORIES TO BUILD THE ULTIMATE COCKPIT For assistance please contact: support@nextlevelracing.com www.nextlevelracing.com...
- Página 20 BUILD THE ULTIMATE COCKPIT For assistance please contact: support@nextlevelracing.com...