Kohler K-852 Manual De Instrucciones página 2

16"
(40.6 cm)
1-5/8"
(4.1 cm)
14" (35.6 cm)
2-1/2"
(6.4 cm)
Product Information
Bath whirlpool
Required accessories:
Jet trim kit K-9696
Fixture*: basin area
Bathing 40-1/2" (102.9 cm)
well x 20" (50.8 cm)
water depth
To 13-5/8" (34.6 cm)
overflow
* Approximate measurements for comparison only.
Pump Heater
1.5 hp 1.5 kW
* Approximate measurements for comparison only.
Drop-in cut-out 58-1/2" (148.6 cm) x 30-1/2" (77.5 cm)
Cut-out for undermount
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage
Circuit-Breaker (ELCB):
Pump/control 208-240 V, 20 A, 50/60 Hz
1019493-1-C
K-852-H2
60" (152.4 cm)
1-3/4" (4.4 cm)
1/4" (6 mm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-852-H2 shown
top area
52-3/4" (134 cm) x
24" (61 cm)
capacity
60 gal (227.1 L)
V A*
240 11
K-586 template
No change in measurements if connected with drain
illustrated. (K-7169-AF or K-7169M-AF)
Note: Pump Protrusion Beyond Rim
Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
Locate the outlet behind the whirlpool and within 24"
(61 cm) of the pump.
Installation Notes
NOTE: Pump protrusion beyond rim.
Install this product according to the installation guide.
Cast iron whirlpools are extremely heavy, making some drop-in
weight
installations difficult. Splitting the deck/surround is recommended
290 lbs
if installing into a deck.
(131.5
kg)
Floor support under whirlpool must provide for a minimum of
1200 lbs (544.3 kg).
Fixture conforms to ASME Standard A112.19.1M. All dimensions
are nominal.
2
32" (81.3 cm)
3/4" (1.9 cm)
18-1/4"
(46.4 cm)
1-1/2" OD
Kohler Co.