Installation Steps; Care And Cleaning - AVS Headlight Covers Instrucciones De Instalación

Installation Steps

Set Upper Headlight Cover in place.
3
Apply pressure to areas of Upper Headlight Cover
with dual-lock tabs to secure.
5

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Warranty
Unconditional Lifetime Warranty: Auto Ventshade Headlight Covers are warranted to be free of manufacturer's
defects. Neither seller or manufacturer shall be liable for any injury, loss or damage, direct or consequential,
arising out of use of this product. User assumes all risk liability whatsoever in connection with this product.
Auto Ventshade requires the retention of these instructions for as long as you own avs headlight covers. Auto
Ventshade also requires that you transfer instructions to any subsequent owner of the vehicle that uses these
covers. Failure to transfer these instructions may void all warranties associated with the headlight covers.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International,
Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment.
We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of
installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from illustrations.
Lund International
800-241-7219 • Visit us at lundinternational.com
© 2017 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
NOTE: The edge flange goes BETWEEN the headlight
and the headlight trim. Use caution when inserting edge
flange in place as using excessive force could damage
4
Repeat Steps 2-5 to install Driver Side Lower Headlight
6
Repeat Steps 1-6 for passenger side Headlight
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
the cover.
edge flange
Cover.
Covers.