Horizon Global CQT76288 Instrucciones De Montaje página 6

4. Trim the impact bars mounting plate by 1" (See Figure 4). Repeat this
process from the opposite side.
6. Tighten all fasteners to torque specifications. Tighten all M12 fasteners with torque wrench to 65 Lb.-Ft. (88 N*M)
7. Obtain vehicle owners approval before cutting. Trim fascia using utility knife. (See Figure 5).
8. Reinstall all fasteners, bumper panel, interior trim panel, wiring harness, fascia and bottom appearance panel removed in Steps 1 and 2.
©2019 Horizon Global™ Corp. - Printed in Mexico
3.75''
4.0''
5. Raise hitch into position then sandwich with newly trimmed impact bar.
Sheet 6 of 18 76288NP 3-15-19 Rev. A